Vývojový kit s STM32F7 STM32F746IGT6 sada B

Dostupnost: položka není skladem
Cena: 3 458,56 Kč 3458.56
cena bez DPH: 2 858,32 Kč
quantity ks

product unavailable

přidat na seznam přání
Hodnocení: 0
Dodavatel: WaveShare
Kód produktu/SKU: Open746I-C Package B

Popis

Vývojová platforma Open746I-C s mikrokontrolérem STM32F746IGT6 se skládá ze základní desky, ke které připojujeme všechny periferie a desky Core746I s mikrokontrolérem, pamětí SDRAM a napájecím blokem.

Open746I-C umožňuje rozšíření pomocí modulů periferií wavehare, např. LCD displejů, ethernetových modulů, přídavné paměti, kamer apod. Rozšíření je umožněno pomocí vyhrazených konektorů.

Sada umožňuje práci s displeji od 4,3 "do 10,1" 1024x600 s kapacitními a odporovými dotykovými panely.

Základní deska:

  1. MCU core board connector: for easily connecting the Core746I
  2. Arduino interface: for connecting Arduino shields
  3. DCMI interface: for connecting camera
  4. 8-bit FMC interface: easily connects to peripherals such as NandFlash
  5. ULPI interface: for connecting high-speed USB peripheral (the STM32F746I integrates USB HS controller without any PHY device)
  6. LCD interface 1: for connecting 10.1inch LCD, 7inch LCD
  7. LCD interface 2: for connecting 4.3inch LCD
  8. SAI1 interface: for connecting audio modules like UDA1380 module
  9. ICSP interface: Arduino ICSP
  10. SPI1/SPI2 interfaces:
     easily connects to SPI peripherals such as DataFlash (AT45DBxx, W25QXX), SD card, MP3 module, etc.
     easily connects to AD/DA modules (SPI1 features AD/DA alternative function)
  11. Ethernet interface: for connecting Ethernet modules
  12. I2S2/I2S3/I2C1 interface: easily connects to I2S peripherals such as audio module, etc.
  13. USART1 connector: USB to UASRT via the onboard convertor CP2102 
  14. QUADSPI interface: 4-wires SPI interface (the F7 series latest peripheral interface), for connecting serial Flash modules like W25QXX Board
  15. SDMMC interface: for connecting Micro SD module, features much faster access speed rather than SPI
  16. USART3 interface: easily connects to RS232, RS485, USB TO 232, etc.
  17. CAN2 interface: for connecting CAN modules
  18. CAN1 interface: for connecting CAN modules
  19. I2C1/I2C4 interface: easily connects to I2C peripherals such as I/O expander (PCF8574), EEPROM (AT24Cxx), 10 DOF IMU Sensor, etc.
  20. MCU pins connector: all the MCU I/O ports are accessible on expansion connectors for further expansion
  21. 5V DC jack
  22. 5V/3.3V power input/output: usually used as power output, also common-grounding with other user board
  23. Power supply switch: powered from 5VDC OR USB connection of the USART1
  24. CP2102: USB to UART convertor
  25. LEDs: convenient for indicating I/O status and/or program running state
  26. Joystick: five positions
  27. WAKE UP button: used as regular button, and/or wake up the STM32 MCU from sleep
  28. Reset button
  29. USART1 jumper
  30. LED jumper
    short the jumper to connect to default I/Os used in example code
    open the jumper to connect to custom I/Os via jumper wires
  31. KEY jumper
    short the jumper to connect to default I/Os used in example code
    open the jumper to connect to custom I/Os via jumper wires
  32. Arduino jumper
    short the upper pins, A4, A5 is used as AD function
    short the lower pins, A4, A5 is used as I2C function

Modul Core746I

  1. STM32F746IGT6: the high performance STM32 MCU which features:
    Core: Cortex-M7 32-bit RISC + FPU + Chrom-ART graphic accelerator
    Feature: single-cycle DSP instructions
    Operating Frequency: 216MHz, 462 DMIPS/2.14 DMIPS/MHz
    Operating Voltage: 1.7V-3.6V
    Package: LQFP176
    Memories: 1024kB Flash, 320+16+4kB SRAM

    MCU communication Interfaces:
           6 x SPI, 4 x USART, 4 x UART, 3 x I2S, 4 x I2C
           2 x CAN, 1 x QUAD-SPI, 1 x DCMI, 2 x SAI
           1 x FMC, 1 x SDMMC, 14 x TIM , 1xLPTIM
           1 xLCD-TFT, 1xSPDIFRX, 1xHDMI-CEC
           1 x USB 2.0 OTG FS
           1 x USB 2.0 OTG HS (supports external HS PHY through ULPI)
           1 x 10/100 Ethernet MAC
           AD & DA converters: 3 x AD (12-bit); 2 x DA (12-bit)
           Debugging/Programming: supports JTAG/SWD interfaces, supports IAP
  2. IS42S16400J: SDRAM 1 Meg Bits x 16 Bits x 4 Banks (64-MBIT)
  3. MIC2075: onboard USB power management device
  4. AMS1117-3.3: 3.3V voltage regulator
  5. 8M crystal
  6. 32.768K crystal, for internal RTC with calibration
  7. Reset button
  8. VBUS LED
  9. Power indicator
  10. Power supply switch, powered from 5Vin or USB connection
  11. Boot mode selection, for configuring BOOT0 pin
  12. JTAG/SWD interface: for debugging/programming
  13. USB connector, supports Device and/or Host
  14. MCU pins expander, VCC, GND and all the I/O pins are accessible on expansion connectors for further expansion
  15. Power jumper
    VBAT: short the jumper to use system power supply, open it to connect external power, such as battery
    VREF: short the jumper to connect VREF+ to VCC, open it to connect VREF+ to other custom pin via jumper wire
  16. OTG jumper
    short the jumper when using USB OTG/HOST
    open the jumper to disconnect from related I/O port

 

Zdroje pro vývoj

  • Schéma
  • Demo code (příklady v C, FreeRTOS, μC/OS-III)
  • STM32 vývojový software (KEIL, STM32CubeMX, etc.)
  • STM32 datasheets
  • STM32 dokumentace pro vývoj

Wikiwww.waveshare.com/wiki/Open746I-C

 

Vnější rozměry:

 Sestava obsahuje:

  1. Open746I-C development board z Core746I x 1
  2. Kabel USB type A na micro B x 1
  3. Kabel USB type A receptacle to micro B x 1
  4. Kabely 4-pin 2-pin x 1
  5. Napájecí zdroj 5V x 1

 

Ve srovnání se standardní sadou byla sada rozšířena a navíc obsahuje:

  1. LCD displej 7 "1024x600 s kapacitním dotykovým panelem: 7inch Capacitive Touch LCD (F)
  2. Modul ethernet:  DP83848 Ethernet Board
  3. Modul USB: USB3300 USB HS Board
  4. Modul digitálního zvuku I2S: UDA1380 Board
  5. Adaptér paměťových karet: Micro SD Storage Board
  6. Kamera: OV2640 Camera Board
  7. Moduls Flash pamětí: W25QXX DataFlash Board
  8. Modul: 10 DOF IMU Sensor (C)
  9. Modul s vysílačem CAN sběrnice SN65HVD230 x 2: SN65HVD230 CAN Board
  10. Modul Analog Test Board
  11. Páska 40-pin FFC
  12. Adaptéry pro montáž displeje

 

 

 

 

Hodnocení produktu (0)

nahoru
Shop is in view mode
Zobrazit plnou verzi stránky
Sklep internetowy Shoper.pl